Interface Specifications This section presents the interface specifications of IO ports for the printer. This manual also for: Printer Maintenance Printer Maintenance Vertical streaks in the printout usually indicate a dirty or faulty print head. Attach the edge of the ribbon onto the bare core and wind it a bit onto the core. Scan product name and number from printed bar codes using the barcode reader. Sensor type See-Through or Reflective 9.

Uploader: Galabar
Date Added: 8 April 2015
File Size: 20.80 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 33592
Price: Free* [*Free Regsitration Required]

Memory full Check graphics and soft Need to reboot the fonts from host.

It allows users or engineers to verify and debug the program. Argox x1000vl sure the Ribbon Bracket is at its lowest position first; then tight argox x1000vl the screws by rotating clockwise. Sensor type See-Through or Reflective 9. Insert the left side of cutter bracket 7 and secure the two screws 6 to the print module.

Argox X-1000VL Industrial Barcode Printer

The FEED button does not make the printer peel. Comments to this Manuals Your Name.

Enter Printer name i. Ethernet settings and parameters X1000vl. Loose the three screws from Tear-off Bracket and then remove Tear Bracket. Argox x1000vl assignments are as follows: Table of Contents Add to my manuals Add. Select the port argox x1000vl the printer and click “Next”.

Argox X Industrial Label Printer.

The manual includes a guide to operate the printer as well as related information on troubleshooting, maintenance, x1000vl technical reference.

Plug the power cable into the power socket on the wall, and then connect the other end of the cable to printer’s qrgox socket.

Remove the argox x1000vl cover on both argox x1000vl and right sides. Check the Cam as screwdriver marked in Figure 1, find a slotted to turn counter-clockwise as Figure 2. Argox x1000vl 80 Figure Page 17 Switching Argox x1000vl Wound Ink-side in or Ink-side out The printer is argox x1000vl to suit flexible applications, no matter with ribbon wound ink-side in manufacturing defaultor with ribbon wound ink-side out.

Figure 5 Page Windows XP; steps in other versions of operation systems are similar. When using Ethernet model printer, please wait till the Ready Indicator to argos blinking, before starting printer operations. Print a test page to check print quality.

Scan product name and number from printed argox x1000vl codes using the barcode reader. The printer feeds inches of blank labels.

Hot News Argox throws a year end party. The printer feeds inches of blank labels.

Loading Ribbon Loading Ribbon Note: Argox x1000vl the media backing paper through the print head module. Turn the pick-up spindle to ensure the ribbon is tightly wound. Argox x1000vl Centronics The parallel port is a standard pin Centronics connector.

Water or spit should be kept away in case of corrosion on heating elements. Memory full Check graphics and soft Need to reboot the fonts from host.

Ethernet Interface The following port complies with Argox x1000vl communication. Button Function 1 Function 2 Press the button and Advanced Installation and Adjustment This chapter describes installation and adjustment procedure for X series argox x1000vl printers. Insert the core onto the ribbon pick-up spindle.

Argox | a Sato Company

If the quality is improved, stop the adjustment; if not, continue with next step. Rotary Cutter with Paper Jam If there is paper jam inside rotary cutter, refer to Rotary Cutter Installation section to remove the rotary cutter.

If the problem persists, replace the print head. Transmission Problems, Recovery graphics or forms. The printer will then feed the labels through the cutter argox x1000vl. Print Head Print Line Position Print Head Print Line Position When the label only exhibits argox x1000vl inferior printing quality and the ribbon is not wrinkled, the position of the print argox x1000vl shall be adjusted, and the adjusting position is shown as Fig.

Argox X-1000VL User Manual

For the XVL model, ignore this step. Connecting the Power Cord Before setting up and connecting the printer you should consider the following. Don’t show me this message again. Remove the outside media guide. For unstable ribbon roll rotation, check the label path and make sure the head latch is securely closed. Connect the Parallel cable, Serial cable, or Ethernet cable to the proper port on the printer and on your computer. Label Length Argox x1000vl Make sure media is loaded and media sensor locates under media.

Argox throws a year end party,In order to express argox x1000vl to arhox regular customer and all employees, Argox throws a year argox x1000vl party on February 9.